Welcome to visit SONYAN Freeze Dryer Manufacturer official website！
E-mail：
service@bjsyhx.com.cn
Why should the small freeze dryer be cleaned regularly? The editor below will tell you. Because the evaporator and condenser in the freeze dryer will produce a lot of dust when working for a long time, the emission of cold air and heat will be affected to a certain extent, so that the cooling or heating effect of the program will be weakened, and a lot of electricity and time will be consumed. When activated, the bacteria inside it will be blown into the room, causing certain damage to the human body, especially in the summer when the bacteria breeds a lot. If it is not cleaned up in time, it will absorb a lot of dust, as well as mites, pollen, lice and Mold.
In summary, you know why
Do you want to clean the vacuum freeze dryer regularly? For a key internal cleaning method of an application equipment, first of all, it is necessary to uniformly attract the attention of each operator to effectively ensure the good use of the equipment, because it is often critical compared to the surface cleaning method The internal cleaning of the freeze dryer is very important, so today we will learn about the related matters that must be paid attention to in the internal cleaning of the freeze dryer.
1. Many heat-sensitive substances will not be denatured or inactivated.
2. When drying at low temperature, some volatile components in the substance lose very little.
3. During the freeze-drying process, the growth of microorganisms and the action of enzymes cannot proceed, so the original properties can be maintained.
4. Since the drying is carried out in a frozen state, the volume is almost unchanged, and the original structure is maintained without concentration.
Regarding the professional internal cleaning method of the freeze dryer, it is necessary to draw the attention of each operator in a unified manner to effectively ensure the good use of the equipment, so for the relevant introduction and pointing out for everyone above, It has to be brought to the attention of every operator.
