Welcome to visit Beijing Songyuan Huaxing official website!
E-mail: sales@bjsyhx.com.cn
Product List
Breaking News
What are the advantages of a laboratory freeze dryer used in a laboratory over conventional methods?
The laboratory freeze dryer uses the physical principle to freeze the moisture in the compressed air to below the dew point, so that it can be precipitated from the air....
Analysis on the drying principle of freeze dryer
I believe everyone is familiar with freeze dryers. Such a machine that integrates freezing and drying has been favored by most experiments. The principle of freeze drying of freeze dryers is actually not complicated. Freezing and drying are divided into two processes. ...
How to properly maintain an industrial vacuum freeze dryer?
Industrial vacuum freeze dryer is composed of refrigeration system, vacuum system, heating system, electrical instrument control system. ...
What is the control system of industrial vacuum freeze dryer?
The control system of industrial vacuum freeze dryer is the command mechanism of the whole machine....
Analysis of periodic inspection and maintenance methods of pilot freeze dryer
Repair and eliminate the leakage and failure of the refrigeration system, vacuum system and heating system, and check whether the indicators of the pilot freeze dryer are in a normal state;...
Contact Us
Beijing Songyuan Huaxing
Service Line:+86-13161061291
Song Yuan:+86-13161061291
Address:C706 Changyin Building, NO.88 Yongding Road, Haidian District, Beijing, China
Email:sales@bjsyhx.com.cn
Facebook:SYHXfreezedryer
Your Location: Home >> News >> Technical support >> The freeze dryer is prepared before work.

The freeze dryer is prepared before work.

Release Date: 2019/5/31 17:34:32 .
Browse: 446

The freeze dryer is prepared before work.
It is well known that when using the freeze dryer for the first time, we must thoroughly clean all parts of the dryer. Everyone knows that stainless steel parts are cleaned with ethanol, and plexiglass is washed with physiological saline. Ampoules are cleaned with an ultrasonic cleaner, but what preparations do we need to make before actually operating the freeze dryer?
The freeze dryer must be pre-frozen before being used. Pre-freezing requires a low-temperature refrigerator, a temperature of minus 40 degrees Celsius, or a low-temperature refrigerator of minus 80 degrees Celsius. The dry-prepared items are placed in a low-temperature refrigerator or liquid nitrogen. For about four hours, it can be observed directly from the outside. After the item is completely frozen, the freeze-drying experiment can be carried out to quickly move the item into the freeze dryer tray to ensure the freeze-drying effect.
The main unit and the vacuum pump are connected by a green vacuum tube, and the joint uses an international standard clamp. In order to effectively prevent air leakage, this type of clamp specially designed a sealing rubber ring in the clamp, apply a proper amount of vacuum grease on the rubber ring, and then clamp it with a clamp to make the joint more closely fit. Together, it effectively prevents air leaks. If the clamp is not clamped, air leakage will occur, which will cause the display value of the instrument panel to be greater than 20pa when vacuum is drawn. At this time, the airtightness of the vacuum pump and the glass cover of the freeze dryer should be checked.
There are two power sockets on the right side of the freeze dryer main unit. One connects the power line of the vacuum pump to the main unit, and then plugs the main power supply on the second freeze dryer into the power supply.
Before the vacuum pump is running, it must be checked whether vacuum pump oil is added, otherwise it will not operate normally. The oil level should not be lower than the center line of the oil mirror. When the vacuum pump is used, it has a strong shaking, and it will gradually become stable.
If the air tightness is not good, apply some vacuum grease to the sealing rubber ring above the cold trap, spin the plexiglass cover on the rubber ring, and test the tightness by opening the vacuum pump. To ensure that its closure is complete.

share to:
Songyuan Freeze Dryer logo
Address:C706 Changyin Building, NO.88 Yongding Road, Haidian District, Beijing, China
Hotline:+86-13161061291
Email:sales@bjsyhx.com.cn Facebook:SYHXfreezedryer
Fax:+86-10-58895379